Flush Mounting, Fixed At Rear (Standard) - Furuno MU-152 Operator's Manual

1.2

Flush Mounting, Fixed at Rear (Standard)

This is the standard installation method.
1. Make a cutout in the mounting location referring to the outline drawing at the back of this man-
ual.
2. Attach the flush mounting sponges H15 and V15 in the order shown in the figure below.
Flush mounting sponges (V15)
for right and left
3. Connect all cables at the back of the monitor unit. See section 1.8.
4. Fit the monitor unit to the cutout.
Flush mounting sponges (H15)
for top and bottom
Cutout
3
1. MOUNTING, WIRING