Blodgett BCX14G Troubleshooting Manual page 20

Operation
MenuSelect Control for Mo
OVEN STARTUP
1. Be sure the gas shutoff switch a
breaker switch below the contro
in the on position. The display f
PRESS POWER KEY TO START.
NOTE: If the real time clock and
up functions are en
display reads PRESS P
TO START AUTO STAR
2. Press the POWER KEY (21). T
reads PREHEAT and the oven
last manu al set temperature in
mode. The dis play flashes RE
and the alarm beeps 5 times
oven is at temperature and read
MANUAL COOKING
1. Turn the DIAL (5) until the dis
MANUAL.
2. Press the TIME KEY (7). Rotate
use the alpha/numeric keypad
desired bake time. Press the c
dial to set the bake time.
NOTE: Time is set in one minute
using the dial. To set t
than one minute increme
alpha/ numeric keypad.
3. Press the TEMP KEY (6). Rotate
use the alpha/numeric keypad
de sired bake temperature. Pres
of the dial to set the bake temp
oven preheats to the new temper
NOTE: Temperature is set in 5 d
ments using the dial. To
less than 5 degree incr
the al pha/numeric keypa
4. Press the desired mode k
steam, hot air or retherm.
If Combi or Retherm are sele
the dial, or use the alpha/num
to enter the desired percentage
NOTE: Retherm has a temperat
250 300_F.
5. When the display flashes REA
open the doors. Load the produ
odels BCX 14 and BX 14
6.
and/or circuit
ol panel are
flashes OFF
PROGRAMMED COOKING
d auto wake
1.
nabled the
POWER KEY
RT.
The display
heats to the
n the hot air
EADY / IDLE
2. Open the doors. Load the p
s when the
3.
dy to bake.
splay reads
PROBE COOKING
e the dial, or
1. Press the PROBE key (13
to enter the
center of the
e increments
time in less
ents use the
e the dial, or
to enter the
ss the center
erature. The
rature.
2.
degree incre
o set time in
rements use
3.
ad.
key, combi,
ected, rotate
eric keypad
e of steam.
ture limit of
ADY / IDLE,
uct.
20
Press the START/STOP KEY
bake cycle. The timer counts
display alternates between
mode and the name of the pr
Turn the DIAL (1) until the
product is highlighted. Pres
the dial to select. The oven
programmed temperature
cooking mode. The display f
IDLE and the alarm beeps 5
oven is at tempera ture and r
Press the START/STOP KEY
bake cycle. The timer counts
display alternates between
mode and the name of the pr
probe mode. The display
PROBE COOK & HOLD. T
select either YES or NO. Pr
of the dial to se lect.
If YES is selected, Cook &
en abled. In the Cook & H
oven cav ity lowers to th
temperature as the product
If NO is selected, Cook &
been enabled the cavity
cook temper ature.
Turn the DIAL to enter the des
temperature in the display. Pre
the dial to save the pull temper
Press the TEMP KEY (6). Ro
use the alpha/numeric keyp
de sired bake temperature. P
of the dial to set the bake te
oven preheats to the new tem
NOTE: Temperature is set in
ments using the dial
less than 5 degree
the al pha/numeric ke
(1) to begin the
s down and the
n the cooking
roduct.
e name of the
ss the center of
preheats to the
in the correct
lashes READY /
times when the
ready to bake.
product.
(1) to begin the
s down and the
n the cooking
roduct.
) to select the
y reads CORE
urn the dial to
ress the center
Hold has been
Hold mode, the
e product pull
cooks.
& Hold has not
maintains the
sired product pull
ess the center of
rature.
otate the dial, or
pad to enter the
Press the center
emperature. The
mperature.
n 5 degree incre
l. To set time in
increments use
eypad.