Table of Contents
Advertisement
4.
Unmute the outputs: One at a time, press and hold the Output 3 button and
then the Output 4 buttons for approximately 2 seconds until each button
lights steadily. The output 3 and output 4 signals are unmuted.
Unmute outputs one at a time.
Press and hold the Output 3 button.
3
Press and hold the Output 4 button.
4
5.
Exit View-only mode: Press and release the View button to exit View-only
mode.
Press the View button
to exit View-Only mode.
VIEW
The View button returns to
unlit or background
illumination.
Locking out the front panel (Executive mode)
The front panel security lockout limits the operation of the switcher from the front
panel. When the switcher is locked, all of the front panel functions are disabled
except for the View-Only mode functions. See "Viewing a configuration" on
page 3-14. Other than in View-Only mode, if the user pushes a front panel button
when the switcher is locked, the View and Preset buttons flash twice and return to
their previous state.
To toggle the lock on and off, press and hold the Enter button and the Esc button for
approximately two seconds.
Press and hold the Enter and
Esc buttons simultaneously to
toggle executive mode on or off.
C O N T R O L
ENTER
PRESET
VIEW
2 seconds
2 seconds
All input buttons and output buttons
return to unlit or background illumination.
C O N T R O L
2 seconds
ESC
ENTER
PRESET
Fiber Matrix 6400 Switcher • Operation
The button returns to its previous indication
3
(lit, background illuminated, or unlit) to
indicate that the outputs are unmuted.
The button returns to its previous indication
4
(lit, background illuminated, or unlit) to
indicate that the outputs are unmuted.
The Preset and View
buttons blink twice
to indicate the mode
VIEW
ESC
change.
Release the buttons.
3-25
Advertisement
Table of Contents
