Table of Contents
Advertisement
im Vertrieb von
Background illumination
Executive mode (front panel security lockout)
System reset to factory defaults
www.camboard.de
CAMBOARD Electronics
5.
To recall the preset, press and release the Enter button (figure 3-24). The
configuration stored in memory location 5 is now the current configuration.
STATUS
X - Mo d e
Press the Enter button to
E n a b l e d
recall the preset.
Figure 3-24 — Press Enter to recall
The buttons on the front panel can be set to provide amber background
illumination at all times or the background illumination can be turned off. To
toggle the background illumination on or off, press and hold the Input 1 and Input
2 buttons for approximately two seconds.
The executive mode limits the operation of the Digital XPoint switcher from the
front panel. When the switcher is in executive mode, all of the front panel
functions are disabled except for the ability to toggle background illumination on
and off. See Background illumination above.
To toggle executive mode on or off, press and hold the Enter and Preset buttons for
approximately two seconds. When the switcher enters executive mode, the LCD
displays X-Mode Enabled for approximately 8 seconds. The LCD also displays
X-Mode Enabled when a front panel button is pressed while the switcher is in
executive mode. When the switcher exits executive mode, the LCD displays
X-Mode Disabled. Release the Enter and Preset buttons. To toggle the executive
mode state again, press and hold the Enter and Preset buttons again.
To reset the switcher to the factory default settings, press and hold the Enter button
on the front panel while you plug in the switcher. Continue to hold the Enter
button until the power up sequence is completed (all front panel buttons cycle on
and off from left to right lit green, right to left lit red, and left to right lit amber).
System reset clears all ties and presets, background illumination, and the executive
mode to the factory defaults.
Tel. 07131 911201
Digital XPoint Matrix Switchers • Operation
Fax 07131 911203
CONTROL
E X T RON
ENTER
PRESET
D X P 4 4
The LCD returns to the
default display.
All buttons return to unlit or
background illumination.
ce-info@camboard.de
STATUS
3-13
Advertisement
Table of Contents
