Table of Contents
Advertisement
Selecting the rear panel Remote port protocol and baud rate
The switcher can support either RS-232 or RS-422 serial communication protocol,
and can operate at 9600, 19200, 38400, and 115200 baud rates. The settings of these
variables can be viewed and changed from the front panel.
View and configure the switcher's serial communications settings as follows:
1.
Select Serial Port Selection and Configuration mode: Simultaneously press
and hold all Control buttons (Enter, Preset, View, and Esc).
Press and hold the Enter, Preset,
View, and Esc buttons.
C O N T R O L
ENTER
PRESET
2.
Release the Control buttons.
3.
Change a value: Press and release the button that relates to the desired value.
Press and release the button(s) to configure the port as
follows:
Baud rate:
Enter — 9600
View — 38400
Serial protocol:
Ouput 63 — RS-232
The selected buttons blink and the others remain lit.
In this example, the port is set to RS-422 at 38400 baud.
C O N T R O L
ENTER
PRESET
4.
Exit Serial Port Selection and Configuration mode: Press and release an
output button.
Press and release
an output button.
5
2 seconds
VIEW
ESC
ENTER
•
All Control buttons light with
one flashing.
The flashing Control button indicates the baud rate as follows:
Enter — 9600
View — 38400
The flashing output button indicates the protocol as follows:
Output 63 — RS-232
In this example, the port is set to RS-232 at 9600 baud.
Preset — 19200
Esc — 115200
Output 64 — RS-422/RS-485
2
63 64
VIEW
ESC
All Control buttons and the Output 63 and Output 64
buttons return to unlit or background illumination.
C O N T R O L
VIEW
ENTER
PRESET
Fiber Matrix 6400 Switcher • Operation
C O N T R O L
2
63 64
VIEW
ESC
PRESET
•
Outputs 63 and 64 both
light with one flashing.
Preset — 19200
Esc — 115200
Output 64 — RS-422/RS-485
2
63 64
ESC
3-27
Advertisement
Table of Contents
