Table of Contents
Advertisement
Input and output buttons
Primary functions
Action:
Indications:
Secondary functions
I/O Grouping
Action 1:
Action 2/
indication:
Presets
Action/
indication:
Output mutes
Action/
indication:
Port
Action/
configuration
indication:
Background
Action:
illumination
a
Select input or output for tie being created.
1
2
Input 1 and Output 1:
Select I/O Group
mode.
Assign an input or output to the selected group.
Lit: Input or output is assigned to the selected group.
Lit: A preset has already been saved to this location.
Blink: Preset location is selected to be saved.
Outputs: Press and hold to mute the audio or RS-232 output.
Outputs, blink: Output audio or RS-232 is muted.
Input 1 and Input 2:
Toggle between background
illumination or buttons unlit.
Input buttons — The input buttons have two primary functions (•) and three
secondary functions (❏):
•
Select an input.
•
Identify the selected input.
(Input 1 only) With the Output 1 button, select I/O Group mode. See
❏
"I/O grouping" on page 3-17.
Select a preset. See "Using presets" on page 3-21.
❏
(Input 1 and Input 2 only) Toggle background illumination of the buttons
❏
on and off. See "Background illumination" on page 3-26.
Blink: potential tie/untie.
Lit: current tie
Amber: video and audio tie
Green: video only tie
Red: audio only tie
3
through
Select a preset in Preset mode.
Select RS-232.
Blink: selected
Fiber Matrix 6400 Switcher • Operation
63
64
Output 63:
Output 64:
Select RS-422.
Blink: selected
3-3
Advertisement
Table of Contents
