Index Maintenance Commands - Nortel DMS-10 Series Quick Reference Manual

Command Name
LSTDIR FILE f v1 v2

Index Maintenance Commands

Command Name
IDXMAINT CLOSE
IDXMAINT CHECK t
IDXMAINT CREATE DIR t v
IDXMAINT CREATE DIR t v s
IDXMAINT CREATE FILE t
IDXMAINT DELETE t
IDXMAINT DIR CLOSED t v
IDXMAINT DIR CLOSED t
LAST v
Note: The IDXMAINT DIR CLOSED t LAST v command is
available only on Turbo BMCs and Non-Turbo BMCs equipped with
3 1/2" disk drives.
IDXMAINT DIR CLOSED t
NEXT v
Note: The IDXMAINT DIR CLOSED t NEXT v command is
available only on Turbo BMCs and Non-Turbo BMCs equipped with
3 1/2" disk drives.
IDXMAINT DIR OPEN t
Maintenance Commands 11
Explanation
Lists directory entry of a specified file
for a range of versions.
f - filename.
v - file version (Range: 1-255 or 0 for
latest version).
v1 - start of range of versions: 1-255.
v2 - end of range of versions: 1-255,
must be greater than v1.
Explanation
Close file currently open for
read.
Check the index file.
Creates a new index file with
primary data only.
Creates a new index file with
secondary and primary data.
Closes open call record file and
opens new file.
Delete oldest secondary file
from disk and updates the
index.
t - file type: AMA, LOG, or
EXC.
v - version # to begin index.
s - first sequence # to be pri-
mary.
Displays the closed files on the
disk.
Displays the closed files on the
disk, starting from version
number variable (v) specified
to the end of the index.
Displays the closed files on the
disk, starting from the next ver-
sion number to the end of the
index.
Displays the open file being
written to on disk.
BMC II AMAT Quick Reference Guide