Nortel DMS-10 Series Quick Reference Manual page 25

Command Name
DMST
DMST p aa
DSPSSO
SSO OFF
SSO ON
*********************************************************
PSWD A nnnnnn p
PSWD uC nnnnnn p
PSWD uD
PSWD L
SITDAT READ
SITDAT WRITE
SETTERM TIMEOUT
SETTERM TIMEOUT x
TDIF
TDIF m s
VALPARM BLOCKS
Maintenance Commands 15
Explanation
Displays DMS-10 LOG terminal
assignments.
Changes the DMS-10 LOG terminal
assignments.
p - Terminal position: 1-6.
aa - DMS-10 SDI terminal number:
00-99 or D (deletes assigned ter-
minal).
Displays current DMS-10 HSO/SSO
status.
Change DMS-10 HSO/SSO sensor
data to suppressed.
Change DMS-10 HSO/SSO sensor
data to preserved.
Add new user password to system.
Change a currently assigned password
or priority level.
Delete the selected user number pass-
word (#: 0-9)
u - user number.
nnnnnn - 6 character alphanumeric
password.
p - priority 1-3 (1 - lowest,
3 - highest).
Displays the user passwords and the
associated priority level.
Reads (restores) the site data parame-
ters from the BMC disk and over writes
the main memory (RAM).
Updates (saves) the site data parame-
ters from memory to disk.
Displays the length of time that no
activity can take place before the BMC
automatically logs off the terminal.
Change automatic terminal timeout
value.
x - minutes: 1-120 or 00 to disable
timeout.
Displays allowable time difference,
between BMC and HOC.
Change allowable time difference.
m - 0-59 minutes.
s - 0-59 seconds.
Displays the minimum number of
blocks required to close AMACRD file
when a polling session starts.
BMC II AMAT Quick Reference Guide