5. On the PTZ interface, click End to complete the settings.
Configuring Auto Scan
1. On the expanded PTZ control panel, click
2. Click the Scan tab.
Figure 57 PTZ-Scan
3. Click the direction arrows to position the left and right limits.
Configuring Network Settings
You can set NVR network parameters so that the NVR can communicate
with devices in the same LAN.
TCP/IP
1. Go to Main Menu > Network > TCP/IP.
The TCP/IP interface is displayed.
54
zoom, focus, iris, and directions.
The PTZ interface is displayed.
The Scan interface is displayed.
Performance Series Embedded NVR User Guide
.