Table 24 More Interface Parameters - Honeywell Performance Series User Manual

Parameter
Bit Rate Type
Quality
I Frame Interval
Bit Rate (Kb/S)
3. Click More.
4. Configure parameters.

Table 24 More Interface Parameters

Parameter
Audio
Compression
Sampling
Frequency
5. Click OK.
6. Click Apply.
Snapshot
You can set snapshot mode, image size, quality and interval.
1. Go to Main Menu > Camera > Encode > Snapshot.
48
Description
In the Bit Rate Type list, select CBR (Constant Bit Rate) or VBR (Variable
Bit Rate). If you select CBR, the image quality cannot be configured; if you
select VBR, the image quality can be configured.
This function is available if you select VBR in the Bit Rate List.
The bigger the value is, the better the image will become.
The interval between two reference frames.
In the Bit Rate list, select a value or enter a customized value to change the
image quality. The bigger the value is, the better the image will become.
The More interface is displayed.
Description
This function is enabled by default for main stream. You need to
manually enable it for sub stream 1. Once this function is enabled,
the recorded video file is composite audio and video stream.
In the Compression list, select a format: G711a, G711u, PCM, AAC.
In the Sampling Frequency list, you can select audio sampling rate.
The Snapshot interface is displayed.
Performance Series Embedded NVR User Guide