Figure 99 Ftp; Table 44 Ftp Parameters - Honeywell Performance Series User Manual

Figure 99 FTP

2. Configure the settings for the FTP settings parameters.

Table 44 FTP Parameters

Parameter
Enable
FTP type
Server Address
Port
Anonymous
User Name
Password
Storage Path
Performance Series Embedded NVR User Guide
Description
Enable the FTP upload function.
•
Select FTP type.
•
FTP: Plaintext transmission.
•
SFTP: Encrypted transmission (recommended)
IP address of FTP server.
•
FTP: The default is 21.
•
SFTP: The default is 22.
Enter the user name and password to log in to the FTP server.
Enable the anonymity function, and then you can login
anonymously without entering the user name and password.
Create folder on FTP server.
•
If you do not enter the name of remote directory, system
automatically creates the folders according to the IP and
time.
•
If you enter the name of remote directory, the system
creates the folder with the entered name under the FTP
root directory first, and then automatically creates the
folders according to the IP and time.
89