Multicast; Figure 69 Multicast Interface - Honeywell Performance Series User Manual

Parameter
Authentication
Password/Encryption
Password
Encryption Type
3. Compile the two MIB files by MIB Builder.
4. Run MG-SOFT MIB Browser to load in the module from
5. On the MG-SOFT MIB Browser, enter the Device IP that you want to
6. On the MG-SOFT MIB Browser, unfold the tree-structured directory

Multicast

When you access the Device from the network to view the video, if the
access is exceeded, the video will not display. You can use the multicast
function to group the IP to solve the problem.
1. Go to Main Menu > Network > Multicast.

Figure 69 Multicast Interface

2. Configure the settings for the multicast parameters.
Performance Series Embedded NVR User Guide
Description
Enter the password for authentication type and encryption type. The
password should be no less than eight characters.
In the Encryption Type list, select an encryption type. The default
setting is CBC-DES.
compilation.
manage, and then select the version number to query.
to obtain the configurations of the Device, such as the channels
quantity and software version.
The Multicast interface is displayed.
67