P2P; Figure 73 P2P Interface - Honeywell Performance Series User Manual

PoE Status
PoE connection
mapping

P2P

P2P is a kind of convenient private network penetration technology. You
do not need to apply for dynamic domain name, doing port mapping or
deploying transit server. You can add NVR devices through the below
way to achieve the purpose of managing multiple NVR devices at the
same time.
Note: Connect the NVR device to the Internet, otherwise P2P cannot run
properly.
1. Go to Main Menu > Network > P2P.

Figure 73 P2P Interface

2. Enable the P2P function.
Performance Series Embedded NVR User Guide
Description
The PoE ports are bound to corresponding channels. When an IPC is
connected to PoE port 1, the corresponding channel is Channel 1.
•
Scan the QR code, download mobile app, and then register an
account.
•
Log in to www.gotop2p.com, register an account, and then add
device via the serial number.
The P2P interface is displayed.
After the P2P function is enabled and connected to the Internet,
the system will collects your information for remote access, and the
information includes but not limited to email address, MAC
address, and device serial number.
You can start adding the device.
Cell Phone Client: Use your mobile phone to scan the QR code
•
71