Onvif User; Figure 111 Add; Figure 112 Onvif User - Honeywell Performance Series User Manual

Figure 111 Add

4. Click OK.

ONVIF User

When the camera from the third party is connected with the NVR via the
ONVIF user, use the verified ONVIF account to connect to the NVR. Here
you can add/delete/modify user.
•
•
1. Go to Main Menu > Account > ONVIF User.

Figure 112 ONVIF User

2. Click Add.
100
Click to modify the corresponding group information, click
to delete the group.
The default ONVIF user is admin. It is created after you initialize the
NVR.
For some series product, the ONVIF user password is modified when
you are initializing the admin password.
The ONVIF User interface is displayed.
The Add interface is displayed.
Performance Series Embedded NVR User Guide