Port; Table 28 Network Parameters (2) - Honeywell Performance Series User Manual

Parameter
Alternate DNS
Test
4. Click OK to go to NIC settings.
5. Set network parameters.

Table 28 Network Parameters (2)

Parameter
IP Version
Preferred DNS server
Alternate DNS server
MAC Address
DHCP
6. Click Apply.
Configuring Router
1. Log in to the router to set the WAN port to enable the IP address to
2. Enable the UPnP function on the router.
3. Connect the Device with the LAN port on the router to connect into
4. Go to Main Menu > Network > TCP/IP, configure the IP address

Port

You can configure the maximum connection accessing the Device from
Client such as WEB, Platform, and Mobile Phone and configure each
port settings.
Performance Series Embedded NVR User Guide
Description
In the Alternate DNS box, enter the IP address of alternate
DNS.
Click Test to test if the entered IP address and gateway are
interworking.
Description
There are two options: IPv4 and IPv6.
DNS server IP address.
DNS server alternate address.
Displays the MAC address of the Device.
Enable the DHCP function. The IP address, subnet mask
and default gateway are not available for configuration
once DHCP is enabled.
•
If DHCP is effective, the obtained information will
display in the IP Address box, Subnet Mask box and
Default Gateway box. If not, all values show 0.0.0.0.
•
If you want to manually configure the IP information,
disable the DHCP function first.
•
If PPPoE connection is successful, the IP address,
subnet mask, default gateway, and DHCP are not
available for configuration.
connect into the WAN.
the LAN.
into the router IP address range, or enable the DHCP function to
obtain an IP address automatically.
57