Figure 77 Period; Figure 78 Record Type - Honeywell Performance Series User Manual

Parameter
ANR
Period
Copy to

Figure 77 Period

3. Set record type.
Note: When the record type is Motion (motion detection), alarm, M&A, IVS
and POS, enable the channel record function when corresponding
alarm occurs. For example, when the alarm type is MD, go to Main
Menu > Event > Video Detection > Motion Detection, select the
record channel and enable record function.
Performance Series Embedded NVR User Guide
Description
You can set ANR (auto network resume) function.
•
The IPC continues record once the NVR and IPC connection fails.
After the network becomes normal, the NVR can download record
file during the offline period from the IPC. It is to guarantee there is
no record loss on current connected IPC channel.
• Set the max. record upload period. Once the offline period is longer
than the period you set here, IPC can only upload the record file
during the specified period.
This function is for IPC that installed SD card and the record function is
enabled.
Define a period during which the configured recording setting is active.
The system only activates the alarm in the defined period.
Click Copy to to copy the settings to other channels.

Figure 78 Record Type

75