Introduction; Safety Precautions - Trane Exergy S 180 Installation And Operation Manual

1 Introduction

1.1 Safety precautions

Read these instructions carefully before installation, commissioning, operation or
maintenance of the device. The given instructions must be followed. Throughout this
manual, the following three symbols are used to point out very important information:
Keep these instructions as well as the electrical diagrams available near the device.
Oilon products are manufactured according to general product standards and
directives, and based on our best knowledge about product design, and technologies.
Operation safety is one of the leading principles in our product development. However,
it is wise to be prepared, and think about safety. Read the following principal safety
warnings and instructions:
EXES01 2150EN
Be careful. The DANGER symbol indicates a possible danger of bodily
harm or lethal injury.
Pay attention. The CAUTION sign indicates a possible danger of
damage to the device, components or surroundings.
Note indicates tips, hints, and other essential information.
Installation, commissioning, or service of the appliance is to be carried
out by an authorized service provider, adhering to all local regulations
and requirements.
IN CASE OF FIRE OR OTHER EMERGENCY
● Turn off power from the main switch.
● Follow safety instructions.
● Contact the safety supervisor.
Connectors in control box are under voltage. Only authorized users may
open safety cover.
3 (66)