Controlling Actuators - Trane Exergy S 180 Installation And Operation Manual

Pos.
6 Stop
7 Start
8 Power control
9 Minimum power
10 Open PID display

5.12 Controlling actuators

To control a valve manually and change its PID settings (if applicable), tap on the
valve's icon in the Process screen.
Actuator popup ver. 2
Pos.
1 Actuator popup window Pop-up window for actuators. Allows the valve actuator to be
2 Close button
3 Auto/Manual toggle
button
4 Closed button
5 Open button
6 Control value
7 PID button
58 (66)
Item
Stop the pump (when under manual control)
Start the pump (when under manual control)
Displays the control value input when under manual control. Tap to
change the value. Grayed out when not in use.
Minimum power level setting; the user can change the lowest
minimum power value.
Tap to open the PID popup, see section Viewing PID controller
values.
Item
controlled manually if required.
Closes the pop-up window.
Toggle between automatic and manual mode.
● Green: automatic
● White: manual
Close the valve/run the actuator to the closed position (when under
manual control).
Open the valve/run the actuator to the open position (when under
manual control).
Displays the control value input (valve opening) when under manual
control. Tap to change the value. Grayed out when not in use.
Tap on the PID button to view and adjust the device's PID values, see
section Viewing PID controller values. Not available for all actuator
types.
Description
Description
EXES01 2150EN