Network And Internet Connections - Trane Exergy S 180 Installation And Operation Manual

4.9 Network and internet connections

CH network connections ver. 2
1 Control panel, Beijer
2 Tosibox
3 PLC, ABB
VFD Variable frequency drive
As shown in the figure above, Tosibox supports a range of options for connecting to
different systems. To access Tosibox's network settings, connect to your Tosibox either
with your laptop or a mobile device.
● Connecting through Wi-Fi: establish a Wi-Fi connection as you would with any other
device. The network ID is Chillheat and the password 0il0nm0bile. Open a web
browser. In the address bar, enter http://10.20.30.1.
● Connecting with a LAN cable: Connect a LAN cable to your device and plug the
cable into the Tosibox unit's service port. Open a web browser. In the address bar,
enter http://172.17.17.17.
● Sign in using the Admin password qw56pomz.
Establishing an internet connection
There are three ways to connect the heat pump to the internet: a direct wired
connection, a mobile USB modem connection and connecting through Wi-Fi.
36 (66)
4 Internet
5 Other heat pumps
6 Customer's system
EXES01 2150EN