Trane Exergy S 180 Installation And Operation Manual page 11

S 600 - S 2000:
Transferring the unit
Lift the heat pump from the beams running along the length of the heat pump (marked
in green in the figure below). Use a forklift or two pallet jacks to lift the heat pump as
indicated by the labels and markings on the device.
Lifting S 600 - S 2000 ver. 1
Lifting the unit for transport
When lifting the unit onto a vehicle for transport, use the lifting lugs attached to the
support frame under the unit, see the figure.
EXES01 2150EN
Be careful not to damage the valves and pipes under the heat
exchanger, see the figure above.
9 (66)