S 600 – S 2000 main parts
D080678 ver. 1
Pos.
1
Control panel
2
Control cabin
3
Condenser
4
Evaporator
5
Subcooler
6
Compressor
3.3 System design and sizing the heat pump
Heat pump or pumps must be selected and configured based on the actual capacity
required and the operating conditions specific to the site. These parameters are
specified by the customer.
If there is a change in operating conditions, the original heat pump settings are no
longer valid and need to be checked.
3.4 Connections and dimensions
For information on connection positions and sizes, refer to the diagrams delivered with
the unit.
18 (66)
The assembly may vary depending on the scope of delivery.
Part
Pos.
7
Double safety relief valve with
changeover valve
9
Filter drier
10
Expansion valve
11
Main switch and either variable frequency
drive, star-delta starter or soft starter
Part
EXES01 2150EN