Language, Date And Time, And Ethernet Settings - Trane Exergy S 180 Installation And Operation Manual

Liquid
The drop-down menu allows you to select the medium used in the cold or warm circuit.
Buffer
If there is a buffer tank in the circuit, activate the buffer by pressing this button. The
buffer along with the associated temperature measurements will be displayed in the
Process view (see the figure below). Note also that the heat pump's setpoint will be
used for the buffer, not the circuit's outlet temperature.
Buffer tank ver. 1
Energy meter
To edit the kilowatt hours per pulse value, tap the value field.
Settings present only in the Cold side view
Flow switch
The flow switch is delivered as standard in all heat pumps, and shown active in the
Cold side view. This setting should not be changed.

5.9 Language, Date and Time, and Ethernet settings

The Other settings view allows users to edit general user interface and heat pump
settings. This view is also shown first during the first start-up.
EXES01 2150EN
Deactivating the flow switch can result in damage to the heat pump or
the system.
53 (66)