S380 Hc+, S490 Hc, S490 Hc+ And S580 Hc Evaporator Inlet Temperature Sensor - Trane Exergy S 180 Installation And Operation Manual

3.5 S380 HC+, S490 HC, S490 HC+ and S580 HC evaporator
inlet temperature sensor
The evaporator fluid inlet temperature sensor used in heat pump models S380 HC+,
S490 HC, S490 HC+, and S580 HC is delivered loose. A Victaulic pipe fitting is also
included. Align the Victaulic fitting so that the temperature sensor coupling is directed
towards the service side of the heat pump as shown on the pictures 1 and 2 below. The
temperature sensor must be attached to the provided Victaulic pipe fitting as shown in
pictures 1 and 2 below.
HP service side ver. 1
EXES01 2150EN 19 (66)