Delivery Content, Optional Equipment And Accessories; Decommissioning - Trane Exergy S 180 Installation And Operation Manual

In some heat pumps, the bottom support frame is not wide enough for the lifting
lugs to extend far enough from the sides of the unit. If this is the case, the unit will
be delivered with an additional lifting support (beam) bolted onto the frame. This will
provide sufficient clearance for lifting the unit without harming the equipment. The
support can be removed after use.

1.3 Delivery content, optional equipment and accessories

Standard delivery content
A standard heat pump delivery includes the following:
● heat pump
● 1 flow switch with cable
● installation and operation manual, electrical drawings
● installation, commissioning and warranty records
● maintenance sheets
● PI-diagram or flow diagram for the pipe connections
● preliminary work form for commissioning.

1.4 Decommissioning

Heat pump systems must be decommissioned in accordance with applicable laws and
regulations. Heat pumps include materials and substances that require special care,
including:
● Refrigerant
● Oil
● Electrical components
● Batteries
● Other materials
The specific considerations for each substance or material are described in the
following sub-sections.
Refrigerant
Depending on the model, the heat pump includes one of the refrigerants listed in table
below.
Refrigerant
R134a
R1234ze(E)
R513A
EXES01 2150EN
If the delivery includes an additional lifting support, hoisting the unit
without the support is not allowed. Doing so will cause damage to the
equipment during lifting.
The lifting support is not intended for use in any other lifting applications
or in continuous use.
Details
Norfluorane / 1,1,1,2-Tetrafluoroethane
trans-1,3,3,3-tetrafluoropropene
mix of R1234yf and R134a
11 (66)