Gateway MX7120 Service Manual page 81

To replace the memory card reader:
1
Complete the steps in
2
If the notebook has IEEE 802.11 wireless networking built in, unplug the antenna
cables from the IEEE 802.11 mini PCI card by following the instructions in
the IEEE 802.11 Mini PCI card" on page
3
Remove the hard drive by following the instructions in
on page 20.
4
Remove the CD or DVD drive by following the instructions in
DVD drive" on page
5
Remove the keyboard cover by following the instructions in
cover" on page 28.
6
Remove the keyboard by following the instructions in
page 32.
7
Remove the LCD panel by following the instructions in
assembly" on page
8
Remove the palm rest by following the instructions in
assembly" on page
9
Remove the three memory card reader shield screws, then remove the shield.
Screw
Screw
"Preparing the notebook" on page
26.
45.
60.
Screw
www.gateway.com
Replacing the memory card reader
6.
13.
"Replacing the hard drive kit"
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the LCD panel
"Replacing the palm rest
"Replacing
"Replacing the CD or
77