Gateway MX7120 Service Manual page 39

10
Insert the tabs on the front edge of the keyboard into the slot under the palm rest.
It may be necessary to press down on the keyboard keys along the front edge of the
keyboard to seat the retaining tabs into their corresponding slots.
11
Gently press the keyboard down until it is flat all the way across. The keyboard should
easily fall into place. Be careful not to damage the LCD panel.
12
Secure the keyboard with the two screws removed in
13
Reattach the keyboard cover by following the instructions in
cover" on page 28.
www.gateway.com
Replacing the keyboard
Step 3.
"Replacing the keyboard
35