Gateway MX7120 Service Manual page 45

17
Replace the LCD cable and tape that was removed in
Caution
18
Replace the cooling assembly cover, then replace the cover screws.
19
Reassemble the notebook.
Two types of tape are used in this Gateway notebook:
Mylar, non-conductive tape is typically transparent, with a red or
■
brown tint.
Conductive tape is typically grey or silver.
■
If the existing tape cannot be reused, replace it with the same type
(conductivity) of tape. Both types of replacement tape should be
non-ESD generating tape.
Do not use cellophane tape.
www.gateway.com
Replacing the cooling assembly
Step 9.
41