Gateway MX7120 Service Manual page 55

13
Lift the LCD panel assembly up and away from the notebook. The LCD panel assembly
is now completely detached from the notebook.
14
Place the new LCD panel assembly onto the notebook, then replace the two hinge
screws.
15
Reattach the cable removed in
board.
16
Slide the antenna cables through the access hole, under the system board, then into
the mini-PCI card area.
17
Plug the LCD video cable removed in
18
Replace the grounding wire and screw removed in
19
Plug the LCD panel connector removed in
20
Reassemble the notebook.
Step 10 to the appropriate connector on the system
Step 8 into the notebook.
Step 6
www.gateway.com
Replacing the LCD panel assembly
Step 7.
into the notebook.
51