Yamaha DT200L 1984-1988 Service Manual page 9

IMPORTANT INFORMATION
GEN
INFO
^^
IMPORTANT INFORMATION
ALL REPLACEMENT PARTS
1. Use only genuine Yamaha parts for all
replacements. Use oil and/or grease recom-
mended by Yamaha for assembly and ad-
justment. Other brands may be similar in
function and appearance, but inferior in
quality.
CASKETS, OIL SEALS, AND 0-RINGS
1. All gaskets, seals, and 0-rings should be
replaced when an engine is overhauled. All
gasket surfaces, oil seal lips and 0-rings
must be cleaned.
2. Properly oil all mating parts and bearings dur-
ing reassembly. Apply grease to the oil seal
lips.
OR
ou
ODER
([)
LOCK WASHERS/PLATES AND COTTER
PINS
1. All lock washers/Plates (D and cotter pins
must be replaced when they are removed.
Lock tab(s) should be bent along the bolt or
nut flat(s) after the bolt or nut has been pro-
perly tightened.
1-2