Yamaha DT200L 1984-1988 Service Manual page 189

CHARGING SYSTEM
Charging Output Test
ELEC
NOTE:
The battery must be fully charged when testing
the charging output.
1. Remove:
• Fuel tank
2. Disconnect:
• Fuse positive lead (Red)
3. Connect:
• Pocket Tester (90890-03104)
Set the tester setector to "DC A x 5"
position.
4. Start the engine.
5. Accelerate the engine to specifications and
check the charging amperage.
Never disconnect the leads from the battery
before stopping the engine.
^
6. Measure:
• Charging output amperage
Out of specification — Perform the next
test.
^D Fuse positive lead
Battery positive lead
lo ®Sl
Charging Output Amperage:
Day:
0. 7 A or more 2, 000 r/min
1. 8 A or less 8,000 r/min
Night:
0. 3 A or more 2. 000 r/min
1. 8 A or less 8,000 r/min
7-15