Yamaha DT200L 1984-1988 Service Manual page 21

ENGINE OIL LEVEL INSPECTION
IIMSP
ADJ
2. Bleeding the pump distributor and/or
delivery pipe
a. Start the engine.
b. Pull the pump cable all the way out to set
the pump stroke to a maximum.
NOTE:
It is difficult to bleed the distributor completely
with the pump stroke at a minimum, and
therefore the pump stroke should be set to a
maximum.
c. Keep the engine running at about 2, 000
r/min for two minutes or so, and both
distributor and delivery pipe can be com-
pletely bled.
Engine Oil Level Inspection
1. Place the motorcycle on a level place.
NOTE:
Be sure the motorcycle is positioned straight up
and on both wheels when inspecting the oil
level.
Y
2. Start the engine, and let it warm up.
3. Inspect:
• Engine oil level
Oil level low — Add sufficient oil.
By the following inspection steps.
"OIL" warning indicator light
2-6