Yamaha DT200L 1984-1988 Service Manual page 12

GEN
INFO
SPECIAL TOOLS
4. Cooling System Tester
P/N 90890-01325
This tester is needed for checking the cooling system.
FOR ENGINE SERVICE
1. Universal Clutch Holder
P/N 90890-04086
This tool is used to hold the clutch when removing
or installing the clutch boss locknut.
2. Rotor Holding Tool
P/N 90890-01235
0
This tool is used to hold the rotor when removing or
installing the flywheel magneto securing nut.
3. Rotor Fuller
P/N 90890-01189
This tool is needed to remove the flywheel magneto.
4. Crank Installer Pot
P/N 90890-01274
This tool is used to install the crankshaft.
1-5