Table of Contents
Advertisement
3.2.10 Num Lock After Boot
This parameter allows you to activate the Num Lock function upon booting. The
default setting is Enabled.
3.2.11 Memory Test
When set to Enabled, this parameter allows the system to perform a RAM test
during the POST routine. When set to Disabled, the system detects only the
memory size and bypasses the test routine. The default setting is Disabled.
This item is fixed to Disabled and is not user-configurable if you enabled the
Auto Configuration Mode and the Fast Boot Mode parameters on page 2 of the
Basic System Configuration menu. See sections 3.2.12 and 3.2.13.
3.2.12 Auto Configuration Mode
When enabled, this parameter automatically sets the system configuration values
to their optimized settings.
parameter to be fixed to Disabled and the shadow RAM regions for system and
video BIOS to Enabled. See sections 3.2.11 and 3.3.1.
This parameter is Disabled by default.
3.2.13 Fast Boot Mode
When enabled, this parameter allows the system to boot faster by skipping some
POST routines. It bypasses memory test, enables Shadow RAM, and enables
primary- and second-level cache. This parameter is disabled by default.
When set to Enabled, this parameter causes the Memory Test parameter to be
fixed to Disabled and the shadow RAM regions for system and video BIOS to
Enabled. See sections 3.2.11 and 3.3.1.
At the same time, it causes the Memory Test
Chapter 3 - BIOS Utility 3-11
Advertisement
Table of Contents
