Table of Contents
Advertisement
Setting the Date and Time
The Set Date and Set Time options in the Main Menu allow you to set the date and time for your
computer. Once you set the date and time, your computer keeps track of it, even when the power
is turned off.
Set the date and time before you configure
the system.
Follow this steps to set the date and time:
1.
Run ECU. See the "Running ECU" section.
2.
From the Main Menu, select Set Date to display the following screen:
Date 01-01-1996 (mm-dd-yyy)
>Select=ENTER<
Figure 2
Set Date
3.
Type in a new date and press
4.
From the Main Menu, select Set Time to display the following screen:
Time 08-30-10 (hh:mm:ss)
>Select=ENTER<
Figure 3
Set Time
5.
Type in a new time and press
P/N 46.AA983.002
Set Date
<Cancel=ESC>
. The program then returns you to the Main Menu.
Set Time
<Cancel=ESC>
.
(8 of 22)
August 22, 1997
Advertisement
Table of Contents
