Table of Contents
Advertisement
7.
Do one of the following:
•
If the CFG file(s) for your board(s) is in the list, select the file(s) and press
•
If the CFG file(s) is not in the list and an option configuration diskette comes with the
board, press
want to insert the option configuration diskette. (If you have only one diskette drive,
press
to display the Change Diskette screen, then remove the System Configuration
diskette.) Insert the option configuration diskette and press
CFG files that the diskette contains. Select the file(s) that corresponds to your ISA
board(s) and press
Destination Diskette box appears.
reinsert the System Configuration diskette. Press
•
If the CFG file(s) is not in the list and an option configuration diskette does not come
with the board, select and copy file(s) from the CFG File Library diskette following the
instructions as when you are using an option configuration diskette.
•
If you cannot locate the CFG file, select Generic ISA Adapter from the System
Configuration diskette and press
section for instructions on using this option.
8.
When the Add Confirmation screen appears, read the board manufacturer's comments then
press
when done The Add screen then appears with a list of the physical slots in the
system.
9.
Select an appropriate slot(s) to install the board(s) then press
board with a tag such as "video", install it in a slot with an identical tag. Otherwise, you can
select any available slot.
If the board that you installed conflicts with other boards or devices, a caution message
appears.
The last board added caused an
unresolvable conflict in your computer's
configuration. This board has a
'Deactivated' status.
Either a locked board is causing this utility
to be unable to find a valid configuration,
or a valid configuration does not exist.
If the board remains deactivated after
unlocking any locked boards, you must
remove this board or the one(s) with which
it is in conflict in order to save a correct
configuration.
>OK=ENTER<
Figure 13
Caution Message
When you see this message, press
showing the deactivated board. Select the deactivated board and press
board from the configuration.
P/N 46.AA983.002
to display the Change Directory screen. Select the drive where you
. (If you removed the System Configuration diskette, the
Remove the option configuration diskette and
. See the "Using the Generic ISA CFG File"
Caution
. The Step 2: Add or Remove Boards screen appears
(16 of 22)
to display a list of
.)
. If you want to add a
to remove the
August 22, 1997
.
Advertisement
Table of Contents
