Acer Altos 900 User Manual page 139

4. To view the switch and jumper settings, highlight the board marked with an
arrow and press Enter. The switch/jumpers settings screen for the board
appears.
5. Scroll through the switch and jumper settings for the board, and press F10
when you have finished viewing the information.
6. To print the information, select Print by pressing F7. The Print Settings
screen appears.
•
If you have a printer attached to your computer, select Print all
configuration settings or Print settings for selected board or option,
then press Enter to print a hard copy of the switch and jumper settings
and other configuration information.
•
If you do not have a printer, select Print all configuration settings to a
file or Print settings for selected board or option to a file. A Print
Information to TXT File screen appears.
•
If you want to print the switch and jumper settings to a different diskette,
insert a diskette in drive A and press Enter. Another Print Information to
TXT File screen appears. Enter the name of your file or choose an existing
filename and press Enter.
If you inserted a different diskette, remember
to reinsert the ECU diskette after printing is
complete.
7. Press F10 when you are through. The ECU main menu, Steps in Configuring
Your Computer, reappears.
Chapter 5 - EISA Configuration Utility 5-13