Table of Contents
Advertisement
Adding EISA Boards
Follow these steps when adding EISA boards to your computer:
1.
Locate the corresponding CFG file for the EISA board. See the "Requirements when Adding
Boards" section for information on locating the CFG file.
2.
Turn off the computer if it is on, and install the EISA board(s). Follow the installation
instructions in the board documentation.
3.
Run ECU. See the "Running ECU" section.
4.
Select Maintain system configuration diskette from the Main Menu then press
display the following screen.
Maintain System Configuration Diskette
Create a backup SCI file
Load a backup SCI file
Copy/update CFG files
Copy/update SCI files
Delete CFG files
Delete SCI files
Return to the main menu
Figure 9
Maintain System Configuration Diskette
5.
Select Copy/update CFG files the press
Configuration diskette appears.
6.
Press
to display the Change Directory screen, then press
Diskette screen.
You may now change your diskette
before pressing ENTER to return to
the previous panel.
>OK=ENTER<
Figure 10
Change Diskette
7.
Remove the System Configuration diskette and insert the option configuration diskette.
Press
.
P/N 46.AA983.002
Change Diskette
(13 of 22)
.
A list of CFG files from your System
to display the Change
to
August 22, 1997
Advertisement
Table of Contents
