Table of Contents
Advertisement
(2) Function setting
The set value of the function setting can be changed.
[1] User level
A
B
2)
Press
❼ to flash function setting No. A on and off. In this state, press
the function setting number you want to set.
(The figure shows the function setting No. P86, that is used for setting the number stitches to be sewn
using the soft-start function.)
3)
Press
❼ to flash setting No. B on and off. In this state, change the set value by pressing
❻ .
4)
Press
❽ to determine the set value.
5)
Press
⓬ to return the sewing machine to the normal sewing state.
In the case of changing the set value for other function setting number, repeat the steps of procedure 2),
3) and 4). Then, finally carry out step of procedure 5).
[2] Service level
1)
Turn on the power while pressing
2)
The procedure of the function setting is the same as the case of the user level.
To display the service level, turn on the power while pressing.
❻
❼
⓬
❽
⓬ .
1)
The function setting screen is displayed
by keeping
seconds in the normal sewing state.
A indicates the function setting number.
B indicates the set value for that function
setting number.
– 83 –
⓬ held pressed for three
❻ to select
Advertisement
Table of Contents
