Standard Adjustment; Feed Dog Height And Gradient - JUKI DDL-8000A Engineer's Manual

3. Standard adjustment

(1) Feed dog height and gradient

WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
A
B
Shipped feed dog
Engraved marker dot
position on the horizontal
feed bar shaft
a
Standard feed dog height (Feed dial graduation 0)
0.8mm : DDL-8000A*-MS
1.2mm : DDL-8000A*-SH (DDL-8000A*-SJ)
Standard feed dog gradient
The engraved marker dot on the feed bar shaft  is adjusted by a feed dog of relevant standard.
Standard adjustment
a
❸
❹
A
B
❻
❺
• 40133950
(MS)
b
b
a
❼
b
• 11403003
(SH-AA/BB)
• 11062601
(SH-GG)
DDL-8000A*-MS : 0.8mm
DDL-8000A*-SH (DDL-8000*-SJ) : 1.2mm
– 5 –
❶
a
❷
b