Installed Length Of The Thread Trimmer Connector Bar (Asm.); Installation Position Of The Thread Trimming Shaft - JUKI DDL-8000A Engineer's Manual

(11) Adjusting the thread trimming unit
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.

10) Installed length of the thread trimmer connector bar (asm.)

DDL-8000A*-MS, SH, SJ

11) Installation position of the thread trimming shaft

The edge of the thread
trimming shaft is
matched with the edge
of the bed.
Standard adjustment
102±0.2mm
Reference value = 40mm
❼
❽
Connecting rod (asm.)
Part No.
40174323
Thread trimming shaft
– 61 –
❽
Connecting rod (asm.)
dimension
102±0.2mm