❺
❻
❸
4. Pull out the panel ❺ short.
5. Remove the panel cable clamp screw ❻, remove
the cable connector ❼, and replace the panel ❺.
❼
6. After replacement of the panel, reassemble it ac-
cording to the opposite procedure.
(Caution) Pull the panel cable ❸.If it is loose, it
Secure the laid cable with a cable clip band.
If a cable clip band is not available right now, refer to
"When a cable clip band is not available right now" on
the next page for a provisional means.
Completion
– 76 –
may interfere with the upper shaft and
the like.