JUKI DDL-8000A Engineer's Manual page 107

Table 2 Panel function setting items
No. Item
J04 Voice language Selects a voice language.
selection 1 : Chinese
2 : English
J05 Voice ON/OFF Selects the voice guidance ON or OFF.
0 : All voice guidance OFF
1 : Only panel operation guidance
2 : All voice guidance ON
J10 Back light Sets the back light brightness.
brightness
J11 Energy-saving Sets the deactivation time of the LCD back light when no operation is
mode conducted.
0 : Back light always activated
1 to 20 :Time until the light is turned off
J14 Password If the password is set to a value other than "0000", the password input screen
is displayed before the memory switch change screen is displayed by holding
down the M switch.
★ This data is not initialized with P70.
Table 3 Sewing machine monitoring items
No. Item
N01 Main software Displays the main software version.
version
N02 Panel software Displays the panel software version.
version
N03 Sewing machine Measures the sewing machine speed and displays it.
speed monitor
N04 Input value of Displays the input value of pedal A/D.
pedal A/D
N05 Display of principal Displays the angle when the up stop position is zero degree.
axis angle
N06 Display of principal Displays the angle when the down stop position is zero degree.
axis angle
N07 Supply voltage A/D Displays the A/D value of the supply voltage.
value
N14 T-motor software Displays the version of the step motor (presser lifter motor) control software.
version
N15 Grease-up stich Counts the number of stiches to inform you of grease-up timing.
count Selection of "0" clears the counter.
(Unit: x100,000 stitches)
The grease-up warning, "E220", is generated at 8 hundred million stitches.
The grease-up error, "E221", is generated at 9 hundred million stitches.
Description
Description
– 94 –
Setting
Setting range Default
level
1 to 2
U 2
(–)
0 to 2
U 2
(–)
1 to 3
U 3
(–)
0 to 20
U 0
(sti/min)
0000 to 9999
S 0
(–)
Setting
Setting range Default
level
– U –
– U –
– S –
– S –
– S –
– S –
– S –
– U –
– S –