Adjusting The Remaining Length Of Needle Thread; Length Of Needle Thread Remaining At The Needle - JUKI DDL-8000A Engineer's Manual

(10) Adjusting the needle thread presser device
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.

2) Adjusting the remaining length of needle thread

3) Length of needle thread remaining at the needle

Standard adjustment
B
A
❷
[MS type] [SH (SJ) type]
c
c = 35 to 45mm
– 41 –
c