uuJump
Startingu
■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
546
1What to Do After the Engine Starts
The vehicle stability assist (VSA) system, vehicle stability
assist (VSA) OFF, adaptive cruise control (ACC) with
Low Speed Follow
*
, safety support
pressure/deflation warning system
come on in amber along with a message in the driver
information interface when you set the power mode
to ON after re-connecting a battery.
Drive a short distance at more than 20 km/h.
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
*
, and low tyre
*
indicators may