Honda Accord 2020 Manual page 356

* Not available on all models
You can initialise the system from the
customized feature on the audio/information
screen.
1. Set the power mode to ON.
2. Press the button.
3. Select Settings.
4. Select Vehicle.
5. Select Deflation Warning System.
6. Select Initialise.
• If the Failed message appears, repeat steps
5-6.
• The initialisation process finishes
automatically.
uuWhen DrivinguDeflation Warning System
1Deflation Warning System *
The vehicle stability assist (VSA) system, vehicle stability
assist (VSA) OFF, adaptive cruise control (ACC) with
Low Speed Follow * , safety support
pressure/deflation warning system indicators may
come on in amber along with a message in the driver
information interface when you set the power mode
to ON after re-connecting a battery.
Drive a short distance at more than 20 km/h.
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
1Deflation Warning System Initialisation
Deflation Warning System cannot be initialised if a
compact spare tyre is installed.
The initialisation process requires approximately 30
minutes of cumulative driving at speeds between
40−100 km/h.
During this period, if the engine is turned on and the
vehicle is not moved within 45 seconds, you may
notice the low tyre pressure/deflation warning system
indicator comes on briefly. This is normal and
indicates that the initialisation process is not yet
complete.
If the tyre chains are installed, remove them before
initialising the deflation warning system.
If the low tyre pressure/deflation warning system
indicator comes on even when the properly inflated
specified regular tyres are installed, have your vehicle
checked by a dealer.
We recommend that the tyres be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
*
* , and low tyre
355