Honda Accord 2020 Manual page 455

uuHonda Smart Parking Assist System
While in operation:
Comes on in white
Blinks
Appears
Setting Assist End
Shift to R
Back In PP In PP Out
Start Start
Check Your Surroundings
Cancel
Beep
454
* u
4. Move the vehicle backward with centre
steering wheel position until the Stop the
car message appears. If the assist start
with going forward, skip this step and go
to step 5.
5. Move the shift lever to ( D .
6. The steering wheel automatically turns.
Place your hands on the steering wheel,
u
and follow the messages respectively
appear on the screen.
u Do not move your vehicle while the
steering wheel is in motion.
7. While the beeper sounds, forward your
vehicle slowly.
Occasionally depress the brake pedal.
u If the length of the intermittent beeps
becomes shorter, slow down.
u Depressing the brake pedal does not
cancel the system.
8. A single long beep sounds along with a
message. Stop the vehicle.
u The beep stops. Follow the next
message by moving the shift lever to
( R .
1Parallel Pull Out from a Parking Space
The Honda smart parking assist system can be useful
only when there are no obstacles around the parking
space, when the parking space is in a rectangular
shape with straight parking marks and when vehicles
in the next parking spaces are within the spaces.
The pull-out feature will work providing that, at
commencement, the road side of the vehicle directly
in front of your vehicle is not extending into the road
approximately one meter beyond the same side of
your vehicle.
If two cars are double parked in front of yours, the
pull-out feature does not work.
If the combined distance between your vehicle and
the vehicle in front and behind is very short or a
person or object is between your vehicle or the other
vehicle(s), the pull-out start icon will appear grayed
out and the feature will not activate.
Once the pull-out feature is activated, it will continue
to operate even if the parking sensors detect a person
or any object in their path.