Light Switches - Honda Accord 2020 Manual

Light Switches

■
Manual Operation
High Beams
Flashing the high beams
Low Beams
Turns on position, tail, and rear
licence plate lights
Turns on headlights, position, tail,
and rear licence plate lights
Rotating the light switch turns the lights on
and off, regardless of the power mode
setting.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
Malaysian models
■
Lights off
Turn the light switch to OFF either when:
• The transmission is in P .
(
• The parking brake is applied.
To turn the lights on again, turn the light
switch to OFF to cancel the lights off mode.
Even if you do not cancel the lights off mode,
the lights come on automatically when:
• The transmission is taken out of
parking brake is released.
• The vehicle starts to move.
uuOperating the Switches Around the Steering WheeluLight Switches
1Light Switches
If you leave the power mode in VEHICLE OFF while
the lights are on, a chime sounds when the driver's
door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 97
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Your vehicle is equipped with the automatic
headlight adjusting system that automatically adjusts
the vertical angle of the low beam headlights. If you
find a significant change in the vertical angle of the
headlights, there may be a problem with the system.
Have your vehicle checked by a dealer.
P and the
(
Continued 177