uuReplacing Light BulbsuTaillights, Brake Lights and Back-Up Light Bulbs
Taillights, Brake Lights and Back-Up Light Bulbs
When replacing, use the following bulbs.
Taillight: LED
Brake Light: LED
Back-Up Light: 16 W
Holding Clip
Bulb
500
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
Left side
2. Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.
Socket
1Taillights, Brake Lights and Back-Up Light Bulbs
Taillights and brake lights are LED type. Have an
authorised Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Clip
Insert the clip with the pin raised, and push until it is
flat.
Push until the
pin is flat.