Table of Contents
Advertisement
uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
Getting Ready to Replace the Flat Tyre
Tool Case
Compact Spare Tyre
The tyre to be replaced.
534
1. Open the boot floor lid.
2. Take the tool case out of the boot.
3. Take the jack, wheel nut wrench and jack
handle bar out of the tool case.
4. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the compact
spare tyre.
5. Place a wheel block or rock in the front and
rear of the wheel diagonal to the flat tyre.
Wheel
Blocks
1Changing a Flat Tyre
WARNING: The jack can only be used for helping an
emergency vehicle breakdown, not for changing the
regular seasonal tyre or any other normal
maintenance or repair operation.
The compact spare tyre is smaller than the regular
tyre. Your vehicle's ground clearance reduces when
the compact spare tyre is installed. Driving over road
debris or bumps could possibly damage the
underside of your vehicle.
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.
1Getting Ready to Replace the Flat Tyre
Be careful not to hurt yourself when removing or
storing the compact spare tyre.
Advertisement
Chapters
Table of Contents
