Table of Contents
Advertisement
uuWhen DrivinguShifting
■
Shift Lever Operation
342
Tachometer's red zone
Shift Lever Position Indicator
(Transmission System Indicator)
M (7-Speed Manual Shift Mode)
Indicator
Shift Indicator
Depress the brake pedal and press the
shift lever release button to shift.
Shift without pressing the shift
lever release button.
Press the shift lever release
button and shift.
1Shift Lever Operation
NOTICE
When you change the shift lever from
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the
lever position before pulling away.
If the transmission system indicator blinks when
driving, in any shift position, there is a problem with
the transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
When shifting positions in extremely low
temperatures (-30°C), there may be a short delay
before the shift position is displayed. Always confirm
you are in the correct shift position before driving.
(
D
to
(
R
and
Advertisement
Chapters
Table of Contents
